Specialized Turbo Levo Comp Carbon

• The MasterMind Turbo Control Unit is your information hub with customizable display fields, including the exact percentage of the battery level, features the new MicroTune feature to adjust the power delivery in 10% increments, so you get exactly the assistance you need when you want it.
• An exclusive “Mullet” design with 27.5″ wheel at the rear and 29″ at the front offers an agile ride against other e-MTBs. The spacious cockpit focuses you on the bike, optimising traction and cornering control. The low bottom bracket, the relaxed angle of the head tube and the reduced offest of the fork maintain stability on difficult terrain.
• The Levo offers six different geometry configurations, allowing you to easily hone your performance for any style, and type of terrain. The head angle can be adjusted between 63 and 65.5 degrees. The bottom bracket height can also be adjusted up or down by 7mm.
• The Levo’s 150mm enduro-inspired travel is flexible on small bumps, devouring impacts on big cuts without jolting, eating corner exits for breakfast, but at the same time offering incredible pedal response and delivering your power to the ground with total efficiency.
• The Levo’s S-Sizing is based on what matters: the rider’s size and style, not the crotch. Six sizes, all with similar head tube lengths, allow you to choose the size that best suits your individual style. The small S-numbers will be agile and responsive, while the large S-numbers offer you more stability and a more space-oriented ride

The Levo offers six different geometry configurations, allowing you to easily hone your performance for any style, and type of terrain. The head angle can be adjusted between 63 and 65.5 degrees. The bottom bracket height can also be adjusted up or down by 7mm.

CHARACTERISTICS:

• E-bike
  WIRED
  Custom Specialized wiring harness
  CHARGER
  Custom charger, 42V4A w/ Rosenberger plug, 100-240V
  MOTOR
  Specialized 2.2 Custom Rx Trail Tuned Motor
  BATTERY
  Specialized M3-700, Integrated battery, 700Wh
  UI/REMOTE
  Specialized MasterMind TCU, percentage of remaining charge, 120 possible display configurations, MicroTune assist adjustment, ANT+/Bluetooth®, w/Handlebar remote
• Cockpit
  STEM
  Alloy Trail Stem, 35mm bar bore
  SADDLE
  Bridge Comp, Hollow Cr-mo rails, 155/143mm
  Specialized
  Trail Grips
  HANDLEBARS
  Specialized, 6061 alloy, 6-degree upsweep, 8-degree backsweep, 30mm rise, 780mm width
  SEATPOST
  X-Fusion Manic, infinite adjustable, two-bolt head, bottom mount cable routing, remote SLR LE lever, 34.9, S1: 100mm, S2: 125mm, S3: 150mm, S4/S5: 170mm, S6: 190mm
• Picture
  HUG. SADDLE
  Alloy, 38.6mm
  FACT FRAME
  11m full carbon, 29″ front wheel, 27.5″ rear wheel, full internal cable routing, 148mm spacing, fully sealed cartridge bearings, 150mm of travel, geo adjust head tube, geo adjust horst pivot
• Suspension
  FOX FLOAT X Performance shock
  , LSR, 2-position lever, 55x210mm
  Fox 36 Rhythm FORK
  , 29″, 44mm offset, Grip damper, S1: 150mm, S2-S6: 160mm travel
• Brakes
  REAR
  BRAKE SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm
  FRONT
  BRAKE SRAM Code RS, 4-piston caliper, hydraulic disc, S/M: 200mm, L/XL: 220mm
• Transmission
  BOTTOM BRACKET
  Praxis Forged/Custom Offset/ISIS Spindle Interface, 160mm
  SRAM GX Eagle GEAR
  , 12-speed
  SRAM GX SHIFTERS
  , trigger, 12-speed
  SRAM NX Eagle CHAINRING
  , 12-speed
  SRAM X-Sync Eagle CHAINRINGS
  , 104 BCD, 34t, steel
  SRAM XG-1275 CASSETTE
  , 12-speed, 10-52t
• Wheels
  REAR HUB
  Alloy, sealed cartridge bearings, 148mmx12mm thru-axle, 28h
  FRONT HUB
  Alloy, sealed cartridge bearings, 15x110mm thru-axle, 28h
  FRONT TIRE.
  Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29×2.6″
  SPOKES DT Swiss Industry
  REAR TIRE
  Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, 27.5×2.6″
  RIMS
  Specialized 29, hookless alloy, 30mm inner width, tubeless ready
  TUBES

  Standard, Presta Valve

• Accessories
  PEDALES
  PEDALES, TEST RIDE PEDALS PROVIDED BY SPECIALIZED
  SWAT
  SWAT CC steerer tube integrated tool with chain tool and link
• Weight
  22.8kg (50 lb, 4.2 oz)